The back of the house just about completed
The south side

The east

The north side

The inside has been insulated, internal walls included and the ply has been put up. Photos of the inside coming soon.

The Cladding is going on and the front deck is completed

The view over the deck from the kitchen
Walls still to be done on the inside. Lots of insulation to put in!


The deck from the living area

The large window in the living area is now in

The north side with cladding almost completed. Underneath and the roof line still to be done.

This has not been without it's challanges. The containers, being second hand have lots of dents and bows and it has been hard work getting the iron straight. If I did this again I would inspect my containers beforhand and make sure they were relatively straight, and had good level floors.

The flooring goes in.

The ply floor has been laid. I will just sand it and put a clear coating over it to keep the light colour.

Here is the plate that sits on the end of the containier and is welded to the support.

The plate ready to be welded

A lot has happened in the last two weeks. The roof sheeting is finished and the decks have been started.
The south deck going in

The House from the south side

The east

The house from the North side.

There is a layer of insulation attached to the roof sheets and there will also be R4s laid directly on top of the containers

The roof frame in place The east side, windows still to go in here

South side

West, more windows to go in.

The north side

The windows going in .

Kitchen, dining area windows.

One of the windows on the west side.

The framework going into the containers

Detail of the frame around the existing container walls. This is the wall between the bathroom and a bedroom
The framework through the big container.

The kitchen

The big container from the front.